TM200 10.0x10.0mm, 0.50mm thick, PL
ThermalPolycrystalline
In stock
€370.00
SKU
145-500-0598
TM200 10.0x10.0x0.5mm PL
Element Six Thermal Management Grade (Diafilm TM) Polycrystalline CVD diamond is a proven thermal management material ideal for high-power RF, opto-electronics and high voltage power semiconductor devices. It reduces thermal gradients near a device, typically by 25 to 30%, thus allowing higher power devices to be used without increasing the system size or reducing the operating ambient temperature.
Diafilm TM is offered on our webstore in four thermal conductivities 1,000 W / mK, 1,800 W / mK, 2,000 W / mK, and 2,200 W / mK in 10x10mm plates, in a range of thickness from 0.3 to 0.5mm
- Carat Weight EA: 0.85 ct
- Lateral Dimensions Measured: to smaller side
- Edges: Laser Cut
- Edge Features: < 0.2 mm
- Laser Kerf: 3°
- Lateral Tolerance: +0.2/-0 mm
- Length: 10.00 mm
- Side 1, Roughness, Ra: polished, Ra < 50 nm
- Side 2, Roughness, Ra: lapped, Ra < 250 nm
- Thickness Tolerance: +/- 0.05 mm
- Thickness Dimension: 0.50 mm
- Width: 10.00 mm
- Bulk Resistivity (Rv): 1x1012 Ohm cm
- Surface Resistivity (Rs): 1x1010 Ohm cm
- Thermal Conductivity: >2000 Wm-1 K-1 @293 K
- Thermal Diffusivity: >11.1 @ 300 K (cm2s-1)
- Thermal Expansion Coefficient: 1.0 ± 0.1 @ 300 K (ppm K-1)