EL SC Plate 4.3x4.3mm, 0.05mm thick
Quantum / Radiation DetectorsSingle Crystal
Single Crystal Electronic (ELSC) grade is Element Six’s highest purity CVD diamond material with respect to point defects, with the lowest N and NV centre density of our commercially available materials. This material contains less than 5 ppb (often below 1 ppb) nitrogen concentration and typically has less than 0.03 ppb NV concentration.
Its combined Electron Mobility, Radiation Hardness and Charge Collection Efficiency of >99% make it the ideal radiation detection material.
This plate is supplied with high quality, low damage polished surfaces, and a thickness of 50µm, enabling a range of applications for quantum technologies and radiation detectors.
This plate contains a small sub surface laser mark for side orientation. The laser mark is an e6 logo which is approximately 150 µm x 150 µm in size and is located in the corner of the plate 150 µm from the edges.
This plate is supplied with a thickness map.- Carat Weight EA: 0.02 ct
- Crystallographic Orientation (Miscut): +/-3°
- Crystallography: Typically 100% single sector {100}
- Lateral Dimensions Measured: to smaller side
- Edges: Laser Cut
- Edge Features: < 0.2 mm
- Edge Orientation: <110> edges
- Face Orientation: {100} faces
- Laser Kerf: <5°
- Lateral Tolerance: +0.4 -0 mm
- Length: 4.3 mm
- Side 1 logo, Roughness , Ra: polished, Ra<5nm on {100} face
- Side 2 reversed logo, Roughness , Ra: polished, Ra<8nm on {100} face
- Thickness Tolerance: +/- 0.01 mm
- Thickness Dimension: 0.05 mm
- Width: 4.3 mm
- Boron Concentration [B]: <1 ppb
- Charge Collection Efficiency (CCE): Typically >95%
- Charge Collection Distance (CCD): Typically >475µm, @0.5 V µm-1 applied field, for 500 µm plate
- Nitrogen Concentration: [Ns0] < 5 ppb